• क्षालक • प्रोद्धावक |
eluant मीनिंग इन हिंदी
eluant उदाहरण वाक्य
उदाहरण वाक्य
अधिक: आगे- It is usually followed by anion-exchange chromatography using 6 molar HCl as eluant.
- After the volume of eluant surpasses the volume of the mobile phase in the column, the sample components will begin to elute.
- Actinium can then be separated from radium, with a ratio of about 100, using a low cross-linking cation exchange resin and nitric acid as eluant.
- These elements can be then identified simply based on their elution position / time, using ?-hydroxyisobutyrate solution ( ?-HIB ), for example, as eluant.
- Illustrative of its chelating abilities, citric acid was the first successful eluant used for total ion-exchange separation of the lanthanides, during the Manhattan Project in the 1940s.
- Separation of trivalent actinides from lanthanide fission products can be done by a cation-exchange resin column using a 90 % water / 10 % ethanol solution saturated with hydrochloric acid ( HCl ) as eluant.
- It is also possible to use a column of cationite and zinc amalgam, using 1 M hydrochloric acid as an eluant, reducing Md ( III ) to Md ( II ) where it behaves like the alkaline earth metals.
- Mendelevium can finally be separated from the other trivalent actinides using selective elution from a cation-exchange resin column, the eluant being ammonia ?-HIB . Using the gas-jet method often renders the first two steps unnecessary.
- However, if the foil is made of gold and thin enough, it is enough to simply dissolve the gold in aqua regia before separating the trivalent actinides from the gold using anion-exchange chromatography, the eluant being 6 M hydrochloric acid.
- The mendelevium can then be separated from the foil material and other fission products by applying acid to the foil and then coprecipitating the mendelevium with lanthanum fluoride, then using a cation-exchange resin column with a 10 % ethanol solution saturated with hydrochloric acid, acting as an eluant.