bolt face उदाहरण वाक्य

उदाहरण वाक्य

1. Cases need to be trimmed to 3.06 " length and the rims rebated to fit a . 416 Rigby bolt face.
2. For this reason, it is a much more economical alternative to cartridges which need larger actions types and larger bolt faces.
3. The large claw extractor was eliminated in favor of a small, but effective part mounted in a newly recessed bolt face.
4. The recoil blows back the bolt, feeds a new round onto the bolt face, which pushes the expended casing off the bolt face.
5. The recoil blows back the bolt, feeds a new round onto the bolt face, which pushes the expended casing off the bolt face.
6. The Gallager was loaded from the rear with brass Springfield ) were ignited by percussion cap, which was placed on the bolt face.
7. The rebated rim design allows for the cartridge to utilize actions chambered for rifles based on the . 375 Holland & Holland bolt face diameter.
8. The case is driven back against the bolt face which results in the stretching of the case, particularly the sidewall immediately forward of the web.
9. Stripping is simple : Safety on, remove magazine, cock and hold bolt open, rotate to left, inspect bolt face and chamber, release bolt under control.
10. The large bolt face and the length of the Magnum Mauser No . 5 action was easily adopted for use with the . 416 Rigby cartridge.