depth of cut उदाहरण वाक्य

उदाहरण वाक्य

1. The infeed table is adjusted so that it is lower than the outfeed table and this gives the depth of cut.
2. Similarly, long cuttings were not viable and tunnels were excavated at much lessor depths of cut than would be adopted today ."
3. While unhappy with the depth of cuts in both bills, the HMO industry prefers the House version, which allows higher payments in urban areas.
4. The saw base can be adjusted for depth of cut and can tilt up to 45?and sometimes 50?in relation to the blade.
5. Those provisions account for nearly half the dlrs 12 billion in the appropriations bill, increasing the depth of cuts to other programs and countries.
6. A meltwater sluiceway with a depth of cuts through the Little Shickshinny-Rocky Run divide between the valleys of Rocky Run and Little Shickshinny Creek.
7. The depth of cut adjustment moves the motor up or down on the baseplate so more or less of the blade projects through the cutting slot.
8. Luis A . Miranda Jr ., the chairman of the Health and Hospitals Corporation, resigned in March after disagreeing with the Mayor over the depth of cuts in Medicaid.
9. In addition, VoluMill makes dynamic adjustments to the axial depth of cut and / or the feed rate so as to never exceed a pre-set rate of material removal.
10. In contrast with other types of High Speed Machining toolpaths, VoluMill toolpaths are typically run at axial depths of cut up to the full flute length of the Milling cutter.