electroforming उदाहरण वाक्य

उदाहरण वाक्य

1. The glass master is rotated in the electroforming tank while a pump circulates the electroforming solution over the surface of the master.
2. The glass master is rotated in the electroforming tank while a pump circulates the electroforming solution over the surface of the master.
3. As the electroforming progresses, nickel is not electroplated onto the surface of the glass master, since that would preclude separation.
4. The full electroforming current density is very high with the full thickness of usually 0.3 mm taking approximately one hour.
5. Bypassing the silvering process and two electroforming stages reduces the risk of introducing noise that can be generated in the electroforming ( galvanic ) process.
6. Bypassing the silvering process and two electroforming stages reduces the risk of introducing noise that can be generated in the electroforming ( galvanic ) process.
7. Electroforming involves the production of a metallic part around a metallic mandrel, although the term is sometimes used more broadly to encompass all electrodeposition processes.
8. A wide variety of shapes and sizes can be made by electroforming, the principal limitation being the need to part the product from the mandrel.
9. The mandrel is most often separated intact or dissolved away after forming, but occasionally ( as in the case in decorative electroforming ) left in place.
10. Suron is a factory established by the kibbutz to produce precise metal parts using photochemical etching and electroforming, and also metal plating in gold and nickel.