fuse holder उदाहरण वाक्य

उदाहरण वाक्य

1. By the 1920s, battery holders used twin metal clips ( like fuse holders ) to hold the battery in place while making electrical contact.
2. The fixed part of the fuse holder contains a ( usually colour-coded ) gauge ring, which will accept end caps up to a certain diameter.
3. In IEC standards, the replaceable element is called a " fuse link " and the assembly of fuse link and fuse holder is called a " fuse ".
4. A few workers toss threaded plastic rings, fuse holders and orange tabs into boxes for eventual hand-over to the government required under a recent ban on mines passed by Parliament.
5. When the fuse blows, the released spring pulls the stub of the fuse link out of the fuse holder tube to reduce surge duration and damage to the transformer and fuse holder.
6. When the fuse blows, the released spring pulls the stub of the fuse link out of the fuse holder tube to reduce surge duration and damage to the transformer and fuse holder.
7. Power entry modules are also available rated as water resistant at IP65, with seal protection at the panel opening, around the fuse holders when provided, and between the inlet housing and connector pins.
8. Cutouts are typically mounted about 20 degrees off vertical so that the center of gravity of the fuse holder is displaced and the fuse holder will rotate and fall open under its own weight when the fuse blows.
9. Cutouts are typically mounted about 20 degrees off vertical so that the center of gravity of the fuse holder is displaced and the fuse holder will rotate and fall open under its own weight when the fuse blows.
10. For example, fuse holders for North American class RK fuses have a pin that prevents installation of similar-appearing class H fuses, which have a much lower breaking capacity and a solid blade terminal that lacks the slot of the RK type.