luminance signal उदाहरण वाक्य
उदाहरण वाक्य
- With a four tube camera, however, this registration problem is avoided because the transient edges in the luminance signal all originate from a single tube.
- The final colour picture was created by combining the chrominance and luminance signals, but the technicians simply switched off the colour tubes whilst this dispute took place.
- This signal could be successfully combined with the luminance signal from digitally-scanned existing broadcast-quality monochrome telerecordings to make new colour master copies, suitable for broadcast and sales.
- Because the color information was designed to be a cheap, backwards compatible addition to the monochrome signal, the color signal has a lower bandwidth than the luminance signal, and hence lower horizontal resolution.
- Dot crawl is most visible when the chrominance is transmitted with a high bandwidth, so that its spectrum reaches well into the band of frequencies used by the luminance signal in the composite video signal.
- If the gamma corrected luminance signal y ^ { \ frac { 1 } { \ gamma } } is simply used instead of y'then colour errors result which can be appreciable for saturated colours.
- The following illustration shows the difference between a scale with linearly-increasing encoded luminance signal ( linear gamma-compressed luma input ) and a scale with linearly-increasing intensity scale ( linear luminance output ).
- In a monochrome receiver the luminance signal is amplified to drive the control grid in the electron gun of the CRT . This changes the intensity of the electron beam and therefore the brightness of the spot being scanned.
- Because the rendering of colors in this way is the goal of both black and white ( monochrome ) film and black and white ( monochrome ) television systems, the Y signal is ideal for transmission as the luminance signal.
- When testing with NTSC between November 1956 and April 1958, the colour subcarrier was 2.6578125 MHz with a'Q'bandwidth of 340 kHz ( matching the rolloff of the luminance signal at + 3.0 MHz ).