sutton tube उदाहरण वाक्य
उदाहरण वाक्य
- The final piece of the puzzle was provided by Arthur Cooke, who suggested using the Sutton tube filled with a dilute gas as a switch, replacing the spark gap system.
- The reflex klystron ( also known as a Sutton tube after one of its inventors, Robert Sutton ) was a low power klystron tube with a single cavity, which functioned as an oscillator.
- Normally this would then pass a second resonator where the output would be tapped, but in the Sutton tube the electrons instead approached a high-voltage plate that reflected them back towards their source.
- Sutton tubes were used in a simpler design known as the " shunt branching circuit ", which was T shaped with the transmitter and antenna located at either end of the horizontal portion of the T, and the receiver at the end of the vertical portion.
- Among the parts on the frame were the Type 53 Modulator, which provided pulses of 35 Amps and 10 kV, the Type TR . 3151 transmitter, containing the CV64 magnetron, CV43 soft Sutton switch and a crystal mixer, and the Type 50 receiver with its CV67 Sutton tube local oscillator.