dielectric loss उदाहरण वाक्य
उदाहरण वाक्य
- Good dielectric materials such as glass have extremely low DC conductivity, and at low frequencies the dielectric loss is also negligible, resulting in almost no absorption.
- However, at higher frequencies ( such as visible light ), dielectric loss may increase absorption significantly, reducing the material's transparency to these frequencies.
- However it is often found that the dielectric losses in FR4 are too high at microwave frequencies, and that the dielectric constant is not sufficiently tightly controlled.
- In a real directional coupler, however, the insertion loss consists of a combination of coupling loss, dielectric loss, conductor loss, and VSWR loss.
- Another source of resistance is dielectric losses from the penetration of radio waves into the ground near the antenna due to the large skin depth at low frequencies.
- Dielectric loss is caused when the insulating material inside the transmission line absorbs energy from the alternating electric field and converts it to heat ( see dielectric heating ).
- The dielectric losses increase in this order : Ideal dielectric ( no loss ), vacuum, air, polytetrafluoroethylene ( PTFE ), polyethylene foam, and solid polyethylene.
- The charges may be separated by a considerable distance and therefore make contributions to the dielectric loss that are orders of magnitude larger than the response due to molecular fluctuations.
- Once the complex permittivity of the material is known, we can easily calculate its effective conductivity \ sigma _ e and dielectric loss tangent \ tan \ delta as:
- These are the terminal resistances, the contact resistance of the electrode contact, the line resistance of the electrodes, the electrolyte resistance, and the dielectric losses in the dielectric oxide layer.