mercury arc valve उदाहरण वाक्य
उदाहरण वाक्य
- In 2004, the mercury arc valves groups were replaced with light-triggered thyristor groups to eliminate the environmental risks of maintenance costs of the obsolete mercury arc valves.
- Between 1992 and 1993 the mercury arc valves of Pole 1 were replaced with thyristor valves by GEC Alsthom, increasing the maximum power and voltage of the line to its current levels.
- Prior to the development of mercury arc valve rectifiers, rotary converters were used to produce DC power from AC . Like other commutator-type machines, these worked better with lower frequencies.
- Formerly, the mercury arc valve, the high-vacuum and gas-filled diode thermionic rectifiers, and triggered devices such as the thyratron and ignitron were widely used in power electronics.
- In 1936 the first experimental HVDC ( high voltage direct current ) line using mercury arc valves was built between load flow studies could be run more efficiently allowing for much better planning of power systems.
- Like glass-bulb valves, steel-tank mercury arc valves were built with only a single anode per tank ( a type also known as the " excitron " ) or with multiple anodes per tank.
- At that time, Bipole I used the world's highest operating voltage to deliver the largest amount of power from a remote site to a city, and employed the largest mercury arc valves ever developed for such an application.
- Mercury arc valves remain in use in some South African mines, Kenya ( at Mombasa Polytechnic-Electrical & Electronic department ), and on the Manx Electric Railway on the Isle of Man ( mercury arc rectifier now decommissioned ).
- Initial operating experience was gained using three series-connected, single anode mercury arc valves in each converter arm, but by 1959 experience had been gained with operating with either one or two mercury arc valves in series per arm.
- Initial operating experience was gained using three series-connected, single anode mercury arc valves in each converter arm, but by 1959 experience had been gained with operating with either one or two mercury arc valves in series per arm.