bulb temperature उदाहरण वाक्य
उदाहरण वाक्य
- To find the thermodynamic dry-bulb temperature the air is cooled by allowing water to evaporate into it until saturation is reached.
- This method can produce snow when the wet-bulb temperature of the air is as high as-1 �C ( 30.2 �F ).
- Meteorologists and others may use the term " isobaric wet-bulb temperature " to refer to the " thermodynamic wet-bulb temperature ".
- By subtracting the wet-bulb depression from the outside dry-bulb temperature, one can estimate the approximate air temperature leaving the evaporative cooler.
- Water-cooled chillers are normally more energy efficient than air-cooled chillers due to heat rejection to tower water at or near wet-bulb temperatures.
- Deep lake water cooling allows higher thermodynamic efficiency by using cold deep lake water, which is colder than the ambient wet bulb temperature.
- An actual wet-bulb thermometer reads a temperature that is slightly different from the thermodynamic wet-bulb temperature, but they are very close in value.
- It is important to consider that the ability for the exterior dry-bulb temperature to reach the wet-bulb temperature depends on the saturation efficiency.
- It is important to consider that the ability for the exterior dry-bulb temperature to reach the wet-bulb temperature depends on the saturation efficiency.
- Similar to the fogging system, the theoretical limit is the wet bulb temperature, but performance of the evaporative cooler is usually around 80 %.