casting machine उदाहरण वाक्य

उदाहरण वाक्य

1. "' Mold Tapering : "'The twin-belt casting machine differs from other moving mold casting machines in that all four mold surfaces are independent.
2. "' Mold Tapering : "'The twin-belt casting machine differs from other moving mold casting machines in that all four mold surfaces are independent.
3. Commercial twin-belt continuous strip casting machines are capable of producing as-cast dimensions from 10 35 mm thick, and up to 2035 mm wide.
4. Once the correct " recipe " of metal is available, the furnace is tapped and poured into ingot moulds, usually via a casting machine.
5. The cooling belts are typically made of low carbon steel and are held under tension within the casting machine to ensure flatness and accuracy.
6. The cover die is secured to the stationary, or front, platen of the casting machine, while the ejector die is attached to the movable platen.
7. Phase III includes plans for a blast furnace, one hot rolling mill, two cold rolling mills, two continuous casting machines and one silicon sheet mill.
8. Learning from the Mountain project, many parts were cast from zamac instead of brass, lowering cost and since parts could be produced in automated die-casting machines.
9. The advantages of this system include fast cycle times ( approximately 15 cycles a minute ) and the convenience of melting the metal in the casting machine.
10. Die Cast Machine Tools, a small company in Green Lanes, Palmers Green had supplied Crescent with Die Casting Machines and took on casting work subcontracted from them.