dielectric strength उदाहरण वाक्य

उदाहरण वाक्य

1. The voltage at which the dielectric becomes conductive is called the breakdown voltage, and is given by the product of the dielectric strength and the separation between the electrodes.
2. Typical AC power entry modules often have dielectric strengths of 2000 volts or more, and can handle currents of up to 10 to 20 amperes at 250 volts maximum.
3. The insulating quality or dielectric strength and breakdown voltage of the insulators as well as the geometry determine the maximum voltage and current produced for a given speed of rotation.
4. In presence of chloride ions, the precipitated material is atacamite; its semiconductive properties lead to increased current leakage, deteriorated dielectric strength, and short circuits between traces.
5. Electrolytic capacitors feature unlimited charge / discharge cycles, high dielectric strength ( up to 550 V ) and good frequency response as AC resistance in the lower frequency range.
6. With this very thin dielectric oxide layer, combined with a sufficiently high dielectric strength, the niobium electrolytic capacitors can achieve a high volumetric capacitance comparable to tantalum capacitors.
7. These films have much less tensile stress, but worse electrical properties ( resistivity 10 6 to 10 15 ?�cm, and dielectric strength 1 to 5 MV / cm ).
8. Since the dielectric strength of gases varies depending on the shape and configuration of the electrodes, it is usually measured as a fraction of the dielectric strength of Nitrogen gas.
9. Since the dielectric strength of gases varies depending on the shape and configuration of the electrodes, it is usually measured as a fraction of the dielectric strength of Nitrogen gas.
10. Typical specifications are : flash point 140 �C or greater, pour point  " 6 �C or lower, dielectric strength 24 MV / m ( RMS ) or greater.