mechanical load उदाहरण वाक्य

उदाहरण वाक्य

1. The motor is geared to the CT rotor, and when the transmitter's rotor moves, the servo motor turns the CT's rotor and the mechanical load to match the new position.
2. A semi-flexible tower is designed so that it can use overhead grounding wires to transfer mechanical load to adjacent structures, if a phase conductor breaks and the structure is subject to unbalanced loads.
3. Such power-factor correction is usually a side effect of motors already present in the system to provide mechanical work, although motors can be run without mechanical load simply to provide power-factor correction.
4. This is why a squirrel-cage blower motor may cause household lights to dim upon starting, but does not dim the lights on startup when its fan belt ( and therefore mechanical load ) is removed.
5. :: All energetically modified cements have field-usage potential depending on the performance characteristics required, which can often be a reflection of the mechanical loads expected together with the ambient environment of the project concerned.
6. All S4s'initially had diameter by thick, radially ventilated disc brakes up front, each with an Anti-lock Braking System ( ABS ) with a mechanical load sensing valve for the rear brakes was standard throughout production.
7. The creep in compression test is also carried out in the RUL 421 to a maximum temperature of 1700 �C . With its sturdy design, the RUL 421 is well suited for these long-running thermal and mechanical loads.
8. In this case, the flywheel which is mounted on the crankshaft stores energy when torque is exerted on it by a firing piston, and it releases energy to its mechanical loads when no piston is exerting torque on it.
9. In Denmark by 1900, there were about 2500 windmills for mechanical loads such as pumps and mills, producing an estimated combined peak power of about 30 MW . The largest machines were on towers with four-bladed diameter rotors.
10. With no mechanical load on the series motor, the current is low, the counter-EMF produced by the field winding is weak, and so the armature must turn faster to produce sufficient counter-EMF to balance the supply voltage.