mounting plate उदाहरण वाक्य

उदाहरण वाक्य

1. Bayonet mounts generally have a number of tabs ( often three ) around the base of the lens, which fit into appropriately sized recesses in the lens mounting plate on the front of the camera.
2. They feature a unique steel mounting plate on the back of the pickup that differs from ALL other Gibson pickups, and has 2 height adjustment screws on one side and one on the other side.
3. Thin-gauge thermoforming as described above is almost always performed on in-line machines and typically requires molds, plug assists, pressure boxes and all mounting plates as well as the trim tooling and stacker parts that pertain to the job.
4. The design of the displacer units, and the way in which they are mounted means that as the suspension is compressed, the ( roughly spherical ) displacer deforms, and hence presents a larger area to the mounting plates.
5. Experiments attached to mounting plates could be placed on the vertical plate, a 25 inches ( 63.5 centimeters ) by 39 inches ( 99.1 centimeters ) mounting surface for up to 200 pounds ( 90.7 kilograms ) of customer hardware.
6. The concealed mechanism is in a chamber of a completely different shape and position, requiring an impractical amount of woodwork to convert from one to the other, and the mounting plate is of a different shape with different mounting holes.
7. Unconvinced that the aerodynamics of a single blade in a wind tunnel would match the real world performance of a multi-stage compressor, the cascade allowed various compressor layouts to be tested simply by moving the plates on a mounting plate inside the wind tunnel.
8. An automatic bolt coupling device comprises a drawbar, a swivelable cast " bell " with a horizontal opening in the middle, a machined pin or " bolt ", an automatic pin release mechanism, a safety locking device with actuating handle and a cushioned mounting plate.
9. I realize this is rather a long shot, but does anyone happen to know where I might find the dimensions of the central screw hole arrangement of this type of monitor mounting plate ( i . e ., the spacing of the four screw holes in a cross arrangement around the central hole )?
10. LO reflections from the PTFE screen were found to be the source of occasional standing waves in scan baselines; subsequent modification of the mounting plates at the bottom and top of the screen gave it a " V " shape, eliminating surfaces of constant phase for the reflected LO and solving the standing wave problem.