kerf उदाहरण वाक्य

उदाहरण वाक्य

1. If the kerf began closing, causing the saw to bind, wedges would be inserted behind the sawblade in order to keep the kerf open.
2. If the kerf began closing, causing the saw to bind, wedges would be inserted behind the sawblade in order to keep the kerf open.
3. In addition, stealth dicing hardly generates debris and allows for improved exploitation of the wafer surface due to smaller kerf loss compared to wafer saw.
4. The Strob inserts or rakers, have cutting edges which extend outside the two plane surfaces of the blade, but fractionally less than the kerf.
5. In sawmills, a swage is used to flare large bandsaw or circle saw teeth, which increases the width of the cut, called the kerf.
6. In the first place, you can't put a featherboard behind the sawblade _ it will close the kerf and pinch the blade with disastrous results.
7. The dozuki, however, can be so thin as to cut a hairline kerf because the act of pulling the blade through the wood serves to tension it.
8. Or, take an ordinary 3 / 4-inch-thick board and cut a vertical kerf on its back, about half the depth of the board.
9. Using blades that have a smaller kerf ( cutting width ) than normal blades, there is less material lost and the possibility of kickback is reduced as well.
10. The kerf, or width, of the cut can be adjusted by swapping parts in the nozzle, as well as changing the type and size of abrasive.