mortises उदाहरण वाक्य

उदाहरण वाक्य

1. Freedman suggests a jig for routing the hinge mortises and I'll surely try it if I ever get around to making another box.
2. Mortise chisels are the most common of these; they are longer and heavier in section so they can be used to chop out mortises.
3. Accuracy is not as important in the creation of these mortises as the biscuit joint is designed to allow a bit of flexibility during glue up.
4. Tucked into a wall cabinet is a mini-collection of braces and bits, including an interesting chairmaker's reamer, which makes tapered mortises.
5. When you have finished, you may have to deepen the hinge mortises to make the hinges once again fit flush with the edge of the door.
6. Since we discussed the cutting of mortises last week, we may as well look at ways of making the second half of the joint, the tenon.
7. To begin with, I'll say that mortises are not something you want to cut entirely by hand unless you are merely trying to pass time.
8. Given the size of the uprights, and that the mortises must go all the way through them, it's generally necessary to cut them by hand.
9. For an 8-inch board, I'd lay out two mortises, each about 3 inches wide with a gap of about 2 inches between them.
10. Then you have the tools for making mortises _ you can use an electric drill here _ and more arcane tools for forming tenons, both straight and tapered.