preheater उदाहरण वाक्य

Usually thermoplastic marking mode should apply with equipment called a "'road marking machine "'to coat traffic lines, and the road paint needs preheating by a device commonly called a preheater.
The ground breaking ceremony for the construction of the plant was held in January 2009 . A roof wetting celebration took place in February 2010, when the preheater tower reached its final height of 109 meters.
The "'Energy Optimization Furnace "'is a BOF variant associated with a scrap preheater where the sensible heat in the off-gas is used for preheating scrap, located above the furnace roof.
In addition to a combustion chamber and the well-known IfS mixer-preheater, the 01.5's boiler was fitted with three full bore boiler safety valves ( Ackermann valves, nominal width 60 ).
It has been replaced by a similar device known as a Globar made of silicon carbide ( SiC ) that operates at about 1100 �C . The Globar does not require an external preheater as it is an electrical conductor at any temperature.

Thallium ( as the chloride ) condenses in the upper zone of the cyclone preheater at temperatures between 450 �C and 500 �C . As a consequence, a cycle can be formed between preheater, raw material drying and exhaust gas purification.
Thallium ( as the chloride ) condenses in the upper zone of the cyclone preheater at temperatures between 450 �C and 500 �C . As a consequence, a cycle can be formed between preheater, raw material drying and exhaust gas purification.
The world-class development laboratory at left background featured rigs for component testing at engine operating conditions, including large indirectly fired air preheater to provide heated non-vitiated ( i . e ., full O2 content ) air for combustion testing.
Other notable features of the " Rekolok " were new, welded cylinders, an " IfS / DR " mixer-preheater system and a new driver's cab front walls with oval windows, mainly on account of the new boiler.
An "'air preheater "'( APH ) is a general term used to describe any device designed to heat air before another process ( for example, combustion in a boiler ) with the primary objective of increasing the thermal efficiency of the process.