retaining ring उदाहरण वाक्य

Two such examples include two retaining rings, or a ring that is molded onto the OD of the bushing that matches with a groove in the housing.
Just turn the mouse over, remove the retaining ring that holds the rubber ball in and use a cotton swap and alcohol to remove the grime from the rollers.
The spacer rings float relative to the nut, axially secured by retaining rings, because they spin around the screw at a lower frequency ( angular velocity ) than the nut.
The heat of the burning delay pellet melts solder holding a retaining ring, allowing the detonator to move under the influence of a spring from the safe to armed position.
The grant comes from the Vincent A . Stabile Foundation in Naples, Fla . Stabile, who died in 2002, made his fortune with the Industrial Retaining Ring Co . and became a philanthropist.

Retaining rings are typically made from carbon steel, stainless steel or beryllium copper and may feature a variety of finishes for corrosion protection depending on the type of environment in which they are used.
Six spring-steel folding fins are then added to the tube-like tail of the warhead body and pinned down with a plastic retaining ring so that they will unfold upon the warhead leaving the launch tube.
The sealing of the Parflange F37 retaining ring connection is done by a bonded seal on the face side of the pipe end or alternatively by a pipe seal carrier ( " PSC " ).
Some square drivers have a through hole to attach the socket to the driver ( using a retaining ring with o-ring and pin type, or single piece molded retaining rings ), a locking pin, or friction ball.
It is not feasible to fit the tire with such a heavy interference as to eliminate this risk entirely, and the retaining ring will ensure that the tire can only rotate on the wheel center, maintaining its alignment.