glass frit वाक्य

उदाहरण वाक्य

1. The glass frit has been found to generate too much contamination, and thus drift, and is no longer commonly used.
2. A glass frit at the bottom of the column retains the resin beads in the column while allowing the buffer and dissolved proteins to exit.
3. The bonding strength is mainly dependent on the density, the spreading area of the glass frit layer and the surface layer of the bonding interface.
4. VIG units which are currently on the market are hermetically sealed along their perimeter with solder glass, that is, a glass frit having a reduced melting point.
5. Hartman's vision for The Cathedral of Christ the Light was likened to the image of a bishop's mitre, shaped by steel and filled with glass frit.
6. Initially these wafers were bonded with low melting temperature glass, called glass frit, but recently other bonding technologies including metallic compression and metallic amalgams, have replaced glass frit.
7. Initially these wafers were bonded with low melting temperature glass, called glass frit, but recently other bonding technologies including metallic compression and metallic amalgams, have replaced glass frit.
8. A filter stick is a short length of glass tubing sealed on one end with a septum, and sealed on the other with filter paper, or a sintered glass frit.
9. Compared to glass frit bonding, the advantage sticks out that the reduction of seal ring geometries, an increase of the hermeticity levels and a shrinking of device size is possible.
10. The process evolves chlorine at the anode; the interaction of the chlorine with the cathode is prevented by employing a suitable separation ( e . g ., a glass frit ).