oil seal वाक्य

With turbocharged engines, the oil seals on the turbocharger may fail, allowing lubricating oil into the combustion chamber, where it is burned like regular diesel fuel.
At a pit stop, heat soak from the in board rear brakes caused the differential oil seal to fail and 55 minutes were lost in the stop.
Fitzpatrick later set the record straight when he revealed that a leaking oil seal ( which was the cause of the smoke ) was making the clutch slip badly.
Durable high pressure seals, low pressure seals and oil seals, hardened crankshafts, hardened connecting rods, thick ceramic plungers and heavier duty ball and roller bearings improve reliability in triplex pumps.
A "'garter spring "'is a coiled steel spring that is connected at each end to create a circular shape, and is used in oil seals, shaft seals, belt-driven motors, and electrical connectors.

Shares in Federal-Mogul, a Southfield-based maker of automotive bearings and oil seals, rose 1 3 / 8 to 32 5 / 8, touching a 52-week high of 32 5 / 8 earlier.
:: : : Given the workspace in most engine compartments, replacing "'either "'the front or rear crankshaft oil seals usually requires pulling the engine ( and / or transaxle / transmission ).
FEDERAL-MOGUL CORP ., Southfield, Mich ., a maker of automotive bearings and oil seals, sold its Australian replacement auto-parts unit to closely held Automotive Components Ltd ., of Victoria, Australia, for undisclosed terms.
Even with extended vent lines, water can frequently leak past the oil seals; thus it is generally wise to check the axle and transfer case lubricants and change if necessary after deep water crossings.
Lubricants meeting API MT-1 provide protection against the combination of thermal degradation, component wear, and oil seal deterioration which is not provided by lubricants meeting only the requirements of API GL-4 and API GL-5.