hop count वाक्य

उदाहरण वाक्य

1. Some distance-vector routing protocols, such as RIP, the maximum hop count is 15, so to perform route poisoning on a route its hop count is changed to 16, deeming it unreachable, and a routing update is sent.
2. ;Hop Count : Number of routers a packet passes through when routing to a remote network, used to limit the EIGRP AS . EIGRP maintains a hop count for every route, however, the hop count is not used in metric calculation.
3. ;Hop Count : Number of routers a packet passes through when routing to a remote network, used to limit the EIGRP AS . EIGRP maintains a hop count for every route, however, the hop count is not used in metric calculation.
4. ;Hop Count : Number of routers a packet passes through when routing to a remote network, used to limit the EIGRP AS . EIGRP maintains a hop count for every route, however, the hop count is not used in metric calculation.
5. Each frame has a maximum hop count, which is determined to be greater than the diameter of the network graph, and is decremented by each bridge . to avoid indefinite looping of AR frames, frames are dropped when this hop count reaches zero.
6. Each frame has a maximum hop count, which is determined to be greater than the diameter of the network graph, and is decremented by each bridge . to avoid indefinite looping of AR frames, frames are dropped when this hop count reaches zero.
7. Accordingly, Song and Perrig propose the following traceback scheme : instead of encoding the IP address interleaved with a hash, they suggest encoding the IP address into an 11 bit hash and maintain a 5 bit hop count, both stored in the 16-bit fragment ID field.
8. In version 0.6 of the protocol, If an ultrapeer receives a message from an ultrapeer with hop count zero then it knows that the message originated by the ultrapeer or by one of its leaves ( The average number of the leaves nodes that are connected to an ultrapeer is 200 ).
9. Even though RBridges are transparent to Layer 3 devices, and all the links interconnected by RBridges appear to Layer 3 devices to be a single link, RBridges act as link routers in the sense that, in the forwarding of a frame by a transit RBridge, the outer Layer 2 header is replaced at each hop with an appropriate Layer 2 header for the next hop, and the hop count is decreased.
10. Integrity protection is assumed to be assured by both the link layer or error detection and correction methods in higher-layer protocols, such as TCP and UDP . In IPv4, UDP may actually have a checksum of 0, indicating no checksum; IPv6 requires a checksum in UDP . Therefore, IPv6 routers do not need to recompute a checksum when header fields change, such as the time to live ( TTL ) or hop count.