stress concentration वाक्य

उदाहरण वाक्य

1. 1 ) Analysis of stress concentration ( Figure1 and Figure 2 ) : the number of the force lines increases in areas with stress concentration.
2. At the intersection of the seam and the lip, both stress concentrations combine and the strength of the glass is reduced by more than fifty percent.
3. As a result, the properties of ductile cast iron are that of a spongy steel without the stress concentration effects that flakes of graphite would produce.
4. Griffith asserted that all material have microcracks or flaws where the stress concentration naturally occurs, and that these were the flaws where, under increasing stress, fractures propagate.
5. After 3000 pressurisation cycles in a specially constructed pressure chamber, airframe failure was found to be due to stress concentration, a consequence of the square shaped windows.
6. Fractures occur more easily in brittle materials like stone when rough owing to the stress concentrations present at sharp corners, holes and other defects in the axe surface.
7. Even so, there are other parameters that affect the life of a component, such as working temperature, repeated loading ( fatigue ), residual stress, and stress concentration effects.
8. I would say circular holes are best, as they facilitate quicker drying and baking, but don't lead to stress concentrations, which potentially cause fractures, like square holes would.
9. This, in combination with masonry thoroughness, led Incan buildings to have a peerless seismic resistance thanks to high static and dynamic steadiness, absence of frequencies and stress concentration points.
10. However, due to stress concentrations resulting from the seam geometry, current seaming techniques may result in minor tensile strength and / or elongation loss relative to the parent sheet.