wheel slip वाक्य

Normally the driver has to maintain tractive effort well below the rail adhesion limit to give himself time to respond to wheel slip.
Is it in one's best interest to shift as early as possible and therefore reduce output torque, which in turn will reduce wheel slip?
When wheels slip causing one set of discs to speed up vs . the other, the silicone thickens instantly to provide a drive coupling.
Instead of just allowing torque to shift when a wheel slips, as in Quattro, Benz uses an electronic traction system to brake the slipping wheel.
That's all supported by an automatic slip control system that senses drive-wheel slip and uses braking or engine power to get things back under control.

This calibration must be done while coasting at a fixed speed to eliminate the possibility of wheel slip / slide introducing errors into the calculation.
It should be noted that this technique normally requires wheel sensors to detect when a wheel is slipping, and only activates when wheel slip is detected.
The longitudinal track was also found cause issue with wheel slip on inclines, and to be noticeably inferior to transverse sleepered track in terms of traction.
In these systems, provision is made for wheel slip _ skid on slippery surfaces _ and torque is transferred away from slipping wheels to gripping wheel.
The linear induction motors also allow the cars to climb steeper grades then would be possible with traditional subway technology since wheel slip is not an issue.