busbar उदाहरण वाक्य

उदाहरण वाक्य

1. The two-pole RCBOs in the picture are not connected across two phases, but have supply-side neutral connections exiting behind the phase busbars.
2. Busbars can have a cross-sectional area of as little as, but electrical substations may use metal tubes in diameter ( ) or more as busbars.
3. Busbars can have a cross-sectional area of as little as, but electrical substations may use metal tubes in diameter ( ) or more as busbars.
4. A busbar must be sufficiently rigid to support its own weight, and forces imposed by mechanical vibration and possibly earthquakes, as well as accumulated precipitation in outdoor exposures.
5. Therefore mixing of brands should generally be avoided and, where unavoidable, care should be taken to ensure that the breaker chosen is a good fit for the busbars.
6. These can be used for drawing off power for temporary installations, or for feeding power into busbars in situations such as temporary generator hook-ups during power outages.
7. Then, two busbars are applied to the glass as follows : the busbars must be parallel and applied to opposing edges on the same side of the glass pane.
8. Then, two busbars are applied to the glass as follows : the busbars must be parallel and applied to opposing edges on the same side of the glass pane.
9. The neutral wire is connected to the neutral busbar to the left with all the white wires, and the other two are the hot wires attached to the main breaker.
10. Once an arc flash begins in a breaker, it can quickly migrate from a single circuit to the busbars of the panel itself, allowing very high energies to flow.